Search here...
TOP
Paper Crafts

3D Star Box Free SVG

241 Views

Affiliate links have been added to this post. As an Amazon Associate, I earn from qualifying purchases. At no extra cost to you, if you purchase through one or more of my links, I may receive a small commission.

As the Fourth of July approaches, the night sky is filled with stars and the atmosphere has the excitement of patriotic celebrations. And what better way to celebrate this holiday than through crafting! Use this 3D Star Box Free SVG Cut File with your Cricut, Silhouette or other cutting machine to create your own star decor. It’s perfect for a centerpiece, on a mantle, or even on a hall table.Plus, let your creativity shine by adding your own emblishments to the outside of the box to use for birthdays or other occasions. Scroll below for the cutting steps and video assembly. Enjoy and Happy Crafting!

-Materials List

Instructions

Step. 1: Download the 3D Star Box Free SVG

Download the SVG file in my free Resource Library HERE. You can get the password for my library by filling out the newsletter form at the bottom of this post.

Save the downloaded zipped folder on your computer. Pay attention to where on your computer the folder downloads and then unzip the folder to extract the contents. The folder and files must be unzipped (extracted) before you can upload the SVG file into your cutting software.

Step 2: Upload the 3D Star Box Free SVG

Upload the SVG file into Cricut Design Space. The SVG file will upload grouped together. You do not need to resize this design. It is prepared to cut and will produce a craft that is approximately 6in width x 5in height x 1.75in depth.

Once the design is uploaded, you will need to UNGROUP the file. Click the design and then in the upper right corner, click the ungroup button ONCE and only once.

Please Note: The star base is colored coded green and purple. The green is the bottom base of the star box and the purple is the top of the star box. It is color coded to make it easier for you to identify which pieces go together.

Step 3: Change Cut Lines to SCORE Lines

After you have ungrouped the file, look for the solid cut lines, in the LAYERS panel. There will be eight (8) total. Select them, then move over to the OPERATION tab and change the operation from Basic Cut to SCORE.

At this time, you will notice that the lines in the LAYERS panel have changed to dashed lines.

Step 4: Attach the Grouping to Canvas

Once you have changed the cut lines to a SCORE line you are ready to attach. Select each grouping of the score line and solid shape layer, individually. Then, right-click on the design, and a pop-up menu will appear. Scroll to find the ATTACH button. You can also select the ATTACH button towards the bottom right of your screen.

Please Note: You must attach each grouping individually. Do this step for a total of eight (8) times. Your layers panel should look similar to mine shown below.

Then click Make in the upper top corner.

Step 5: Mat Preview

After you click Make, a new window will open with your mat preview. When you are on this screen, you will see the software has prepared eight (8) mats for the project. Take note of the order of the mats. Examine the left side of your screen that has the different mats.

You can rearrange some of the elements to reduce the amount of mats that are required. For example, there will be two green mats. Move the star on a green mat to fit on the other green mat that has the star and rectangle sides. You can repeat this step for the lavender mats as well. Also, you can move the lettering on the black mat, to the blue mat, if you desire for the lettering to be blue.

Look for the mats that has SCORE and BASIC CUT. These mats should have the star and rectangle side shapes. If you do not see both of these operations for the mats that have those shapes, click cancel and repeat step three (3) of changing that cut line to a score line.

Arrange your card stock and mats to match the order on your screen. Then click CONTINUE at the bottom right.

Step 6: Medium 80lb Card Stock Cut Settings

Once you click continue, your next screen will have your material selection menu. For this project, I am using the card stock setting of Medium Card Stock 80lb Cut Setting.

Please Note: For the blue mat with the star shape that also has the tiny stars inside the shape, I used the Card Stock for Intricate Cuts Setting.

Check again to make sure that your scoring stylus/wheel and blade are ready for use. Check to make sure that your Light Grip mats are in the correct order and match the sequence your software has prepared. Secure your card stock to your mat with your brayer. After you have completed this check, you are ready to begin your cut.

Step 7: Assemble the 3D Star Box Free SVG

That’s it! All Done! Time to assemble the 3D Star Box Free SVG. Check out this video of the assembly.

You finished Crafty Friend! I hope you enjoy cutting and assembling this 3D Star Box Free SVG! Come show me your craftiness and post a picture on this post over on my Facebook page, AllThingsWereCreated20, to show yours off. See you there! Also, if you have crafty friends who would enjoy this post, I would be thrilled if you would share the crafty fun and link them to my website.

Stay crafty!

-Ny

Please SHARE this 3D Star Box Free SVG Cut File Design!

If you enjoy this design, would you please share it on social media? I would greatly appreciate it. Sharing will help my blog continue to grow which will allow me to continue to provide more free designs for you. Click the picture below to pin it. Thanks so much!

Ready to Download?

Download this 3D Star Box Free SVG design in my FREE resource library. The password to access my FREE resource library is always at the bottom of my newsletter. Use the Design Number to find the file inside the library.

Design #2353D Star Box Free SVG–FREE cut file, available in my resource library

Click HERE to go to my resource library, your gateway to free downloads.

Also, please note that for security and size reasons the files are downloaded as zip files. To gain access to the files, you will need to extract/unzip the downloaded folder.

Last but Not Least

Friendly Reminder: These designs are not to be distributed outside of this blog post.  You are welcome to use these designs for personal or commercial use up to 200 uses in your own home. Please visit my Terms of Use and if you have any questions don’t hesitate to reach out. Thanks for your support and understanding.

Looking for More July 4th Designs?

In addition to the design above, check out this Fourth of July Butterfly Shadowbox SVG on the blog!! Click the picture to get to the design.

Want to Sign Up for My Newsletter?

Want to sign up for my Newsletter? Fill out the form below. After subscribing, you will receive a confirmation email. If you don’t see this email, please check your spam/junk folders. Once you confirm, a Welcome email will arrive for you. Welcome to the community and Happy Crafting!

Join our mailing list.
Be the first to know about new designs
exclusive offers, and special events.
You’ve successfully signed up! Check your email for details.

«

»

Leave a Comment

Your email address will not be published. Required fields are marked *