Search here...
TOP
Paper Crafts

Happy Spring Fence Decor

440 Views

Affiliate links have been added to this post. As an Amazon Associate, I earn from qualifying purchases. At no extra cost to you, if you purchase through one or more of my links, I may receive a small commission.

Do you love Fence Decor? It is absolutely the cutest and with the onset of spring, which often means new beginnings and new life, there is no better way than to combine these two ideas! Which brings us to today’s freebie! This FREE Happy Spring Fence Decor Layered Paper Craft SVG Cut File if perfect for your Cricut, Silhouette or other cutting machine! It also combines so many different elements. It shows Easter eggs, a bunny, a baby chick, a butterfly, spring flowers and green grass! Many different elements to add to your decor and get you in the mood for Spring and Easter. Scroll below for a written tutorial and video assembly!

-Materials List

  • I am using my Cricut Explore. You could use your Cricut Maker or another similar cutting machine.
  • Light Grip Cutting Mat
  • Brayer
  • Tweezers (This is the set I have and use)
  • Glue. I am using Art Glitter Glue
  • One (1) 12in x 12in sheet of card stock in Purple, Light, Purple, Green, White, Yellow, Black
  • One (1) 12in x 12in sheet of card stock in FIVE different shades of Pink
  • One (1) 6in x 6in sheet or scrap of card stock in Brown, Light Brown, Teal, Aqua, Orange, Gray and Lavender

Instructions

Step 1: Download the Happy Spring Fence Decor SVG Cut File

Download the SVG file in my free Resource Library HERE. You can get the password for my library by filling out the newsletter form at the bottom of this post.

Save the downloaded zipped folder on your computer. Pay attention to where on your computer the folder downloads and then unzip the folder to extract the contents. The folder and files must be unzipped (extracted) before you can upload the SVG file into your cutting software.

Step 2: Upload the Happy Spring Fence Decor SVG Cut File

Upload Happy Spring Fence Decor SVG Cut File into Cricut Design Space. The SVG will upload grouped together and is sized to produce a sign that is approximately 11.5in width x 9in height. If you wish to delete, hide or cut certain elements at certain times, you can ungroup the design and proceed with your steps. However, if you wish to send the file directly to cutting all at once, you do not need to ungroup but select Make It in the upper right corner.

Step 3: Examine the Mat Preview

After you have selected Make It, a new window screen will open. On this screen you will see that the software has prepared 19 (nineteen) mats for you! Phew, that’s a lot! Take time to examine each mat and prepare your Light Grip Blue mats to match the order on your screen. Also take note of the size of the elements on each mat. For several of the mats, i.e. the orange, light blue, brown, some of the pink mats, you will not need a full 12in x 12in sheet of card stock. Search your stash and find a scrap piece! Line up your scrap piece to match the position shown on your screen.

Using the scroll bar to the left of your screen, scroll to find both purple mats. Select the purple egg mat and select the egg. Click the three dots that appear and then click move object. A new window will open showing all the various mat colors. Find the other purple mat, select it and then click continue. This will move the egg to the mat that has the purple back element and butterfly back.

Select the mat that has the purple back and butterfly elements. You will see the purple egg also on that mat. Select the egg and move it to part of the mat where is will not cut another element. If necessary, rotate the egg so that it fits on the mat. Again, go through to check the order of the mats and ensure that your mats and card stock match the order the software has prepared. Once you are certain of the order, return to the first mat, select it and then click continue in the lower right corner.

Step 4: Check Cut Settings

After you click continue, a new window will open with your card stock cut settings. For this project, I will cut using the Card Stock 80lb setting however, if you find that any of your card stock shredded, it may be necessary to cut on the Card Stock for Intricate Cuts setting. Use your scroll bar to the left to complete a final check of the order of your mats. You should also see that your mat number has reduced to 18 mats. Remember to use your brayer to secure your card stock to your mat. Once you are satisfied that everything is correct, load your mat into the machine and begin your cuts.

Pro Tip: After each cut, peel the mat away from your card stock. This will keep the card stock from curling.

Step 5: Assemble the Happy Spring Fence Decor SVG Cut File

That’s it! You have completed the steps for cutting the Happy Spring Fence Decor SVG Cut File. Watch this video of the assembly.

I hope you enjoyed this Happy Spring Fence Decor SVG Cut File! I hope you had fun choosing your color combinations! Feel free to post your crafty project over on my Facebook page, AllThingsWereCreated20, to show it off. And if you have crafty friends who would enjoy this project, I would be so honored if you would share the crafty fun and link them to my website.

Happy Crafting!!

-Ny

Please SHARE this Happy Spring Fence Decor SVG Cut File!

If you enjoy this design, would you please share it on social media? I would greatly appreciate it. Sharing will help my blog continue to grow which will allow me to continue to provide more free designs for you. Click the picture below to pin it. Thanks so much!

Ready to Download?

Download thisHappy Spring Fence Decor SVG Cut File in my FREE resource library. The password to access my FREE resource library is always at the bottom of my newsletter. Use the Design Number to find the file inside the library.

Design #132–Happy Spring Fence Decor SVG–FREE cut file, available in my resource library

Click HERE to go to my resource library, your gateway to free downloads. If you would like to sign up for my newsletter, please enter your name and email address below.

Also, please note that for security and size reasons the files are downloaded as zip files. To gain access to the files, you will need to extract/unzip the downloaded folder.

Last but Not Least

Friendly Reminder: These designs are not to be distributed outside of this blog post.  You are welcome to use these designs for personal or commercial use up to 200 uses in your own home. Please visit my Terms of Use and if you have any questions don’t hesitate to reach out. Thanks for your support and understanding.

Looking for More Spring Designs?

In addition to the design above, check out this design in my Etsy shop. Click the picture to get to the design.

Want to Sign Up for My Newsletter?

Want to sign up for my Newsletter? Fill out the form below. After subscribing, you will receive a confirmation email. If you don’t see this email, please check your spam/junk folders. Once you confirm, a Welcome email will arrive for you. Welcome to the community and Happy Crafting!

Join our mailing list.
Be the first to know about new designs
exclusive offers, and special events.
You’ve successfully signed up! Check your email for details.

«

»

5 COMMENTS

  • Autumn

    Thank you so much for sharing! Unfortunately, every time I click on the download link in the resource library it redirects me back to the tutorial.

  • Autumn

    Never mind! It was me clicking on the wrong link Guess that’s what happens when you haven’t had a full cup of coffee yet. Thank you again for sharing your design!

    • AllThings
      AUTHOR

      Yay! Glad you were able to find the link! Have fun crafting!

      • Priscilla

        Please help me with the download link

        • AllThings
          AUTHOR

          Hi Priscilla! I can see your email on my list so you should have access to the library and be able to download the file. I’m not sure what is not working. Can you send me a reply email to my account? We can try to sort through the issue there. Thanks!

Leave a Comment

Your email address will not be published. Required fields are marked *