Search here...
TOP
Paper Crafts

Layered Retro Roller Skate Free SVG

271 Views

Affiliate links have been added to this post. As an Amazon Associate, I earn from qualifying purchases. At no extra cost to you, if you purchase through one or more of my links, I may receive a small commission.

Roller skating is making a comeback!! And it brings with it that nostalgic feeling and charm of the retro era. Remember being at the roller rink, talking and laughing and skating to the tunes? For us, as crafters, this is a chance for us to get crafty and blend the essence of roller skating with some DIY projects. This Layered Retro Roller Skate Free SVG Cut File is a golden opportunity for you to paper craft with your Cricut, Silhouette or other crafting machine. Add in some fun pattern card stock or mix and match fun solid card stock. Add some pom-poms to accessorize! Lots of fun ways to personalize this design. And whether you’re a seasoned skater or a newcomer, this craft promises endless fun and creative way to roll back in time! Scroll below for the easy cutting steps and video assembly. Enjoy!

-Materials List

Instructions

Step. 1: Download the Layered Retro Roller Skate Free SVG

Download the SVG file in my free Resource Library HERE. You can get the password for my library by filling out the newsletter form at the bottom of this post.

Save the downloaded zipped folder on your computer. Pay attention to where on your computer the folder downloads and then unzip the folder to extract the contents. The folder and files must be unzipped (extracted) before you can upload the SVG file into your cutting software.

Step 2: Upload the Layered Retro Roller Skate Free SVG

Upload the SVG file into Cricut Design Space. The SVG file will upload grouped together. You do not need to resize or ungroup this design. It is prepared to cut and will produce a craft that is approximately 8.8in width x 7.6in height.

Once the design is uploaded, you will need to UNGROUP the file. Click the design and then in the upper right corner, click the ungroup button ONCE and only once.

Step 3: Change Cut Lines to DRAW lines

After you have ungrouped the file, look for two (2) dashed cut lines, in the LAYERS panel. Select them both, then move over to the OPERATION tab and change the operation from Basic Cut to DRAW. At this time, you will notice that the lines in the LAYERS panel have changed to DRAW lines. These draw lines will give the effect of stitching on the roller skate.

Step 4: Attach the DRAW lines to the Canvas

Once you have changed the cut lines to a DRAW line you are ready to attach. Select one (1) draw line with its coordinating solid shape layer. Then, right-click on the design, and a pop-up menu will appear. Scroll to find the ATTACH button. You can also select the ATTACH button towards the bottom right of your screen.

Return to the LAYERS panel and find the second draw line. Select the draw line with its coordinating solid shape layer. Then, right-click on the design, and a pop-up menu will appear. Scroll to find the ATTACH button. You can also select the ATTACH button towards the bottom right of your screen.

Then click Make in the upper top corner.

Step 5: Mat Preview

After you click Make, a new window will open with your mat preview. When you are on this screen, you will see the software has prepared eleven (11) mats for the project. Examine the left side of your screen that has the different mats and take note of the order of the mats.

You will notice that you can reduce the amount of mats needed with the yellow and light blue mats. Select the single element on the mat and click the three (3) dots that appear, to the left, in the bounding box. Select Move Object and follow the prompts to more the single element to the coordinating color mat. For example, move the yellow single element to the other yellow mat. Repeat this for the blue single element. Once you have moved the elements, you will need to rearrange all the elements on the mat so that they will all cut without overlapping. Use the rotate bar (the turn icon, to the right, in the bounding box).

Also, ensure that your light blue mat has the operation PEN and Basic Cut. If you do not see both of these operations for the light blue mat, click cancel and repeat step 3 of changing that cut line to a draw line. If both draw and basic cut are visible, arrange your card stock and mats to match the order on your screen. Then click CONTINUE at the bottom right.

Step 6: Medium 80lb Card Stock Cut Settings

Once you click continue, your next screen will have your material selection menu. For this project, I am using the card stock setting of Medium Card Stock 80lb Cut Setting. Check again to make sure that your PEN and blade are ready for use. Check to make sure that your Light Grip mats are in the correct order and match the sequence your software has prepared. After you have completed this check, you are ready to begin your cut.

Step 7: Assemble the Layered Retro Roller Skate Free SVG

That’s it! All Done! Time to assemble the Layered Retro Roller Skate Free SVG. Check out this video of the assembly.

You finished, Crafty Friend! I hope you enjoy cutting and assembling this Layered Retro Roller Skate Free SVG! Did you use any retro-style pattern card stock? What color combination did you use? Come show me your craftiness and post a picture on this post over on my Facebook page, AllThingsWereCreated20, to show yours off. See you there! Also, if you have crafty friends who would enjoy this post, I would be so very honored if you would share the crafty fun and link them to my website.

Be crafty everyday!

-Ny

Please SHARE this Layered Retro Roller Skate Free SVG Design!

If you enjoy this design, would you please share it on social media? I would greatly appreciate it. Sharing will help my blog continue to grow which will allow me to continue to provide more free designs for you. Click the picture below to pin it. Thanks so much!

Ready to Download?

Download this Layered Retro Roller Skate Free SVG design in my FREE resource library. The password to access my FREE resource library is always at the bottom of my newsletter. Use the Design Number to find the file inside the library.

Design #229Layered Retro Roller Skate Free SVG–FREE cut file, available in my resource library

Click HERE to go to my resource library, your gateway to free downloads.

Also, please note that for security and size reasons the files are downloaded as zip files. To gain access to the files, you will need to extract/unzip the downloaded folder.

Last but Not Least

Friendly Reminder: These designs are not to be distributed outside of this blog post.  You are welcome to use these designs for personal or commercial use up to 200 uses in your own home. Please visit my Terms of Use and if you have any questions don’t hesitate to reach out. Thanks for your support and understanding.

Want to Sign Up for My Newsletter?

Want to sign up for my Newsletter? Fill out the form below. After subscribing, you will receive a confirmation email. If you don’t see this email, please check your spam/junk folders. Once you confirm, a Welcome email will arrive for you. Welcome to the community and Happy Crafting!

Join our mailing list.
Be the first to know about new designs
exclusive offers, and special events.
You’ve successfully signed up! Check your email for details.

«

»

Leave a Comment

Your email address will not be published. Required fields are marked *