Search here...
TOP
Paper Crafts

Layered Toucan Bird Free SVG

292 Views

Affiliate links have been added to this post. As an Amazon Associate, I earn from qualifying purchases. At no extra cost to you, if you purchase through one or more of my links, I may receive a small commission.

Toucan Birds are beautiful and colorful. They are also often identified by their large, brightly colored bill which can be up to half the length of their body. Toucans can usually be found in the tropical rainforests of Central and South America and are also associated with summer themes with makes them the perfect summer craft. This Layered Toucan Bird Free SVG Cut File is an easy DIY paper craft to add to your summer decor. Using only a few sheets of card stock you can cut this design with your Cricut, Silhouette or other cutting machine. Scroll below for a short written tutorial and video assembly. Happy Crafting!

-Materials List

  • I am using my Cricut Maker. You could use your Cricut Explore or another similar cutting machine.
  • Light Grip Cutting Mat
  • Glue. I am using Art Glitter Glue
  • Brayer
  • One (1) 8.5in x 11in sheets of card stock in White, Dark Gray, Red, Orange, Brown, Burnt Orange, Green, Dark Green
  • A scrap or One (1) 8.5in x 11in sheets of card stock in Yellow Orange, Yellow, Teal
  • One (1) 12in x 12in and One (1) 8.5in x 11in sheet of card stock in Black or Three (3) 8.5in x 11in sheets of card stock in Black

Instructions

Step 1: Download the Layered Toucan Bird Free SVG Cut File

Download the SVG file in my free Resource Library HERE. You can get the password for my library by filling out the newsletter form at the bottom of this post.

Save the downloaded zipped folder on your computer. Pay attention to where on your computer the folder downloads and then unzip the folder to extract the contents. The folder and files must be unzipped (extracted) before you can upload the SVG file into your cutting software.

Step 2: Upload the Layered Toucan Bird Free SVG Cut File

Upload the Layered Toucan Bird FREE SVG Cut File into Cricut Design Space. The SVG will upload grouped together and is sized to produce a lighthouse that is approximately 7.6 in width x 6.3 in height. The design does not need to be resized or ungrouped. However, if you wish to make the design larger or smaller you may do so by grabbing the handles around the bounding box of the design and moving your mouse until you achieve your desired size. Please Note: The smaller you size the design, the more difficult it may be for your machine to cut.

Once you have the design uploaded on the canvas and at the size that you desire, select Make It in the upper right corner.

Step 3: Mat Preview

Once you have selected Make It, a new window will open with your mat preview screen. On this screen you will see that the software has prepared fourteen (14) mats for the cut. Use the scroll bar to the left and scroll through all the layers. Take note of each layer and the order of the layers.

When you are scrolling you will note that the software has prepared three (3) mats that have black elements If you wish to rearrange these elements to fit on two (2) mats continue to Step 4. If you do not wish to rearrange any elements, select Continue in the lower right corner and proceed to Step 5. Please Note: You will not be able to fit all three (3) red elements on one mat.

Step 4: Move and Rearrange the Black Bird Layers

Using the scroll bar to the left of your screen, scroll until you locate two of the three black mats. We will need to move one of the black layers to one of the other two black mats so that both elements will cut on one 12in x 12in sheet. Please Note: If you wish to use only 8.5in x 11in sheets, skip this step and proceed directly to step 5.

Select a black element and click the three dots that appear at the upper left corner of the bounding box. Then select Move Object. A new mini-window will open and you must select the one of the other two black mats. Click continue to close the window.

After you have selected continue, select the mat that now has both of the black elements. Select one of the elements and rearrange both elements until both fit on the mat without overlapping. Remember if the layers overlap in any way, they will not cut correctly.

Return to the scroll bar and scroll though all of the prepared mats. Again, take note of the order and colors of the mats. Then select the first mat! It is crucial that you select the first mat after determining the order. If you do not, the cut order of the mats will not be correct.

Once you are certain of the order of your mats and the arrangement of the elements on each mat, select the CONTINUE button at the lower right corner of your screen.

Step 5: Card Stock Cut Settings

After selecting Continue, your next screen will have your material selection menu. For this project, I will use the Custom Setting Card Stock for Intricate Cuts. Check again the order of the mats, arrangement of the elements and ensure that your card stock order matches the software order. You should notice that the software has changed the number of your mats to thirteen (13) if you rearranged the black elements and fourteen (14) if you did not rearrange the black elements. Use your brayer to secure your card stock to your mat. Once you are ready to cut, load your mat into your machine and begin.

Step 6: Assembly of the Layered Toucan Bird Free SVG Cut File

That’s it! You have finished cutting the Layered Toucan Bird Free SVG Cut File. Check out this short video of the assembly.

I hope you love this Easy DIY Layered Toucan Bird Free SVG Cut File and really enjoyed creating it! I would love to see how your toucan turned out. Feel free to post a picture on this post over on my Facebook page, AllThingsWereCreated20, to show it off. See you there! And if you have any crafty friends who might enjoy this post, I would be so grateful if you would share the crafty fun and link them to my website.

Stay crafty!!

-Ny

Please SHARE this Layered Toucan Bird Free SVG Cut File!

If you enjoy this design, would you please share it on social media? I would greatly appreciate it. Sharing will help my blog continue to grow which will allow me to continue to provide more free designs for you. Click the picture below to pin it. Thanks so much!

Ready to Download?

Download this Layered Toucan Bird Free SVG Cut File in my FREE resource library. The password to access my FREE resource library is always at the bottom of my newsletter. Use the Design Number to find the file inside the library.

Design #151–Layered Toucan Bird SVG –FREE cut file, available in my resource library

Click HERE to go to my resource library, your gateway to free downloads. If you would like to sign up for my newsletter, please enter your name and email address below.

Also, please note that for security and size reasons the files are downloaded as zip files. To gain access to the files, you will need to extract/unzip the downloaded folder.

Last but Not Least

Friendly Reminder: These designs are not to be distributed outside of this blog post.  You are welcome to use these designs for personal or commercial use up to 200 uses in your own home. Please visit my Terms of Use and if you have any questions don’t hesitate to reach out. Thanks for your support and understanding.

Want to Sign Up for My Newsletter?

Want to sign up for my Newsletter? Fill out the form below. After subscribing, you will receive a confirmation email. If you don’t see this email, please check your spam/junk folders. Once you confirm, a Welcome email will arrive for you. Welcome to the community and Happy Crafting!

Join our mailing list.
Be the first to know about new designs
exclusive offers, and special events.
You’ve successfully signed up! Check your email for details.

«

»

Leave a Comment

Your email address will not be published. Required fields are marked *